Bedroom reach-ins
Double hang, a drawer stack, full-width top shelf. The most common job we do in this category.
Closet organizers for Edmonton homes that roughly double what a standard reach-in holds. Where there is no closet at all, we build a floor-to-ceiling wardrobe.

Most reach-in closets in Alberta homes are 24" deep and 5 to 8 feet wide, with one rod and one shelf. The ends behind the door frame are dead space and the floor collects everything else.
Our closet design splits the space into zones: double hang in the middle, a drawer stack or shelves at the ends where you can reach them, and an upper shelf that runs the full width. Unlike a generic closet system from a box, every panel is cut to your closet. For kids' rooms we set rods lower and add a second rod position for later.

Pick a reach-in closet organizer for an existing closet, or a built-in wardrobe with its own doors.
Double hang, a drawer stack, full-width top shelf. The most common job we do in this category.
Coat rod at 66", boot tray zone, a shelf for hats and gloves, hooks on the side panels.
Low rods now and pre-drilled positions for later. Bins on shelves instead of drawers if you prefer.
Custom wardrobes in Edmonton condos, basement bedrooms and any room with no closet. Floor to ceiling with hinged or sliding doors.
Shelves at 12–14" spacing, a pull-out hamper and a drawer for small items.
| Hinged doors | Sliding doors | |
|---|---|---|
| Access | Full opening at once | Half or two-thirds at a time |
| Floor space | Needs about 24" to swing | None |
| Best for | Bedrooms with clear space in front | Narrow rooms, hallways, basements |
| Hardware | Blum soft-close hinges | Aluminium top track with soft-close |
| Price effect | Included in the wardrobe rate | About $900–$2,500 per opening |
Sliding door panels are priced on their own page.
A reach-in closet organizer for a 5 to 6 foot closet usually costs $1,500–$2,500. Larger reach-ins run up to about $4,000 and built-in wardrobes $3,500–$8,500, CAD before GST, installed. Most clients tell us the payoff is not needing a dresser in the bedroom.
Kits come in fixed widths, so you end up with gaps, fillers and wasted corners. Ours are cut to the closet on our CNC, use 18 mm panels instead of thin laminate, and run on Blum hardware with a 10-year warranty.
Yes, please empty it before install day. We remove the old shelving and take it away.
Our wardrobes are fixed to the wall for safety but built from separate boxes, so they can be taken down and reinstalled if you move.
Melamine. It wipes clean and resists scuffs. Painted fronts look great but chip easier with toys and shoes.
Width, depth, height and a photo with the doors open. That is enough for a first price.